The Bench · Materials & methods


A soft body. A clean silhouette. The material behind Blane Chocklett’s Gummy Minnow.

A good baitfish fly starts with proportion. Length, depth, and taper establish the shape; color and flash finish the job. Chocklett’s Sili Skin gives the tier direct control over that outline. Cut it, fold it around a hook, and press the layers together to form a complete body.

That approach made the Gummy Minnow a distinctive pattern. The materials list is short, but the work demands care. Clean cuts, restrained layering, and an open hook gap matter more than adding another color.

Pearl Umpqua Gummy Minnow with a translucent Sili Skin body, reflective flank, and molded eye
A Gummy Minnow from our fly selection. Its layered body gives the tier a defined baitfish profile from nose to tail.

What is Sili Skin?

Sili Skin is a soft, flexible sheet with an adhesive back. It can form the body of a fly or cover an underlying structure. Its best-known application is Chocklett’s Gummy Minnow, which Umpqua describes as a blend of color, translucency, and soft plastic. Umpqua’s account of the pattern traces the idea to smallmouth bass feeding on conventional soft-plastic baits.

Our Sili Skin package contains two 2-by-6-inch strips. Together they provide 24 square inches of material before trimming. How many flies that produces depends on body size, layers, and cutting waste.

Hareline Chocklett’s Sili Skin package in Metallic Silver, showing the reflective sheet material
Metallic Silver Sili Skin. Leave the backing in place while laying out and cutting your pieces.
Specification Details
Package Two adhesive-backed strips
Strip dimensions 2 × 6 inches each
Total sheet area 24 in², about 155 cm²
Material format Soft, flexible sheet
Colors listed 13 in our selection
Signature pattern Blane Chocklett’s Gummy Minnow

Our selection includes Belly White, Metallic Green, Red, Sea Foam Green, Copper, Metallic Silver, Mother of Pearl, Chartreuse, Prismatic Silver, Prismatic Gold, Clear, Peacock, and Prismatic Copper. Check the product page for current availability.

A note on material specifications

Umpqua identifies Sili Skin as soft plastic. Its description does not publish an exact polymer formula, sheet thickness, hardness, or measured stretch limit. We use the published package dimensions for planning cuts and judge the finished fly by its proportions.

Why We Use It

Sili Skin lets us build a smooth exterior with the color contained inside the body. A light inner layer, a narrow darker back, and a clear outer layer give each part a specific job. The body establishes the shape. The back defines the upper edge. The outer skin covers the assembly.

That construction makes the edges important. An uneven cut remains visible along the flank, and an oversized patch can turn a slender minnow into a deep-bodied fly. We aim for a continuous taper, with enough material to form the shape and little extra.

The choice of finish changes the effect. Metallic and prismatic layers make the flank more reflective. A clear outer layer leaves the underlying colors visible. Before committing to a batch, hold a small sample over your chosen body color and see how the layers look together.

Get the outline right. Let the layers supply the detail.

We also pay attention to where the body meets the hook. A convincing profile still needs room for the hook to work. Keep material clear of the point, leave space through the gap, and avoid a bulky nose that crowds the eye.

The Gummy Minnows in our fly bins

We list Umpqua Gummy Minnows in Brown, Green, Pearl, Blue, and Chartreuse, with #2 and #6 options. Those numbers describe hook size, not a guaranteed finished length. Compare the complete fly with the forage you want to imitate.

Blue Umpqua Gummy Minnow with a narrow blue back and translucent belly
Blue. A narrow colored back defines the upper edge of the body.
Chartreuse Umpqua Gummy Minnow with a bright chartreuse back and reflective body
Chartreuse. A brighter back changes the color treatment while retaining the minnow outline.

The pattern crosses freshwater and saltwater. Umpqua lists bass and trout applications and describes its use for false albacore feeding on small, translucent baitfish. The useful connection is the forage: a compact minnow profile can serve wherever fish are feeding on bait of similar proportions.

At the bench, a finished fly makes a useful reference. Look at the depth behind the head, the taper through the tail, the eye placement, and the exposed hook gap. When changing size, scale the entire body instead of simply adding length.

How to tie a Gummy Minnow

The Gummy Minnow has several published variations. The sequence below describes a straightforward layered version: a light body, a contrasting back, eyes, and a clear outer skin. Build one complete fly before cutting material for a dozen.

  1. Set the proportions

    Secure the hook and decide on body length and depth. Allow room at the eye for the finished head and keep the point and gap exposed. Use only the thread needed for the attachment and finish; a thick foundation adds bulk beneath the skin.

  2. Cut with the backing attached

    Lay out the light body piece, a narrower back, and the clear cover before exposing the adhesive. Leave a small trimming allowance around the intended outline. Keeping the backing attached makes it easier to control the sheet and compare matching sides.

  3. Form the inner body

    Peel back enough backing to position the material around the shank. Align the sides, then fold and press the adhesive faces together to establish the body and tail. Work gradually so the material bonds where you intend. Keep it relaxed while checking the outline.

  4. Add the back

    Apply a narrow contrasting strip along the top of the body. Keep both sides even and press it down smoothly. The back should define the upper edge without covering the whole flank. Check the profile from above as well as from the side.

  5. Position the eyes

    Place one eye on each side at the same distance behind the nose. Check the alignment before covering them. Our molded eyes range from 1/8 to 5/16 inch, allowing you to choose a size that fits the fly instead of forcing the same eye onto every body.

  6. Apply the outer skin

    Fit the clear layer over the body and eyes. Bring the adhesive surfaces together carefully, pressing from the center toward the edges to work out trapped air. Check that the layers lie flat before making the final cuts.

  7. Trim, finish, and inspect

    With the material relaxed, trim a smooth belly and tapered tail. Finish the nose with a compact thread head where your version requires it. Clear the hook eye, check the gap, and inspect both sides for wrinkles or lifting edges. Swim the first fly before repeating the proportions.

For another documented variation, InTheRiffle’s Gummy Minnow demonstration lists a TMC 811S, white 100-denier GSP, a pearlescent body, green back, clear cover, and 3/16-inch eyes. Treat that recipe as a starting point and scale it to the hook and baitfish.

Work with the material

The adhesive rewards a deliberate sequence. Cut first. Peel only what you need. Align the pieces before bringing the sticky faces together. Once a loose offcut catches the body, correcting it can take longer than cutting the piece again.

Avoid pulling hard on the sheet while shaping. It becomes difficult to judge the final outline under tension. Let each layer relax, smooth it into place, and make the final profile cut after the body is assembled.

Keep trimmed pieces on their backing and separate from the finished fly. Small clean offcuts may still be useful for backs or accents. A tidy work surface is especially helpful when working with Clear, where stray fibers and trapped scraps are easy to see.

Before tying a batch, inspect one fly in water. Check whether it tracks as intended and whether the body interferes with the hook. Correct the proportions on that first fly, then use it as your reference.

Choosing the right skin material

Sili Skin is useful when the sheet forms a substantial part of the fly. For a simple wing case or scud back, a thinner sheet or a precut strip may suit the job. Choose by the structure you need to build.

Material Where we use it
Sili Skin Layered baitfish bodies and shaped coverings where self-adhesion is useful.
Thin Skin Nymph wing cases and shellbacks. A stretchable sheet with matte and shiny faces.
Scud Back Scud and nymph backs. Available in 1/8- and 1/4-inch widths.
Live Gummy Skin Baitfish coverings with a more pronounced reflective, scale-like surface.

Chocklett describes Live Gummy Skin as a development of the original material with a textured scale finish. That makes it another option when you want more visible surface detail. Keep the amount of material proportionate to the fly.

Build the profile. Fish the fly.

The Gummy Minnow earns its place through a clear idea: a small number of materials assembled into a defined baitfish shape. Start with a slim body, keep the layers clean, and leave room for the hook to do its job.

Sources and further reading
  1. Umpqua: Gummy Minnow. Material description, design background, fishing applications, and repair behavior.
  2. InTheRiffle: Gummy Minnow tying demonstration. One published hook, thread, skin, and eye combination.
  3. Chocklett Factory: Live Gummy Skin. The textured, scaled variation.
  4. Package dimensions, listed colors, hook sizes, and all photographs come from the Feather Craft products linked in this guide. Availability may change.

Feather Craft Fly Fishing
Holding fast to tradition in angling since 1955.